Over the past two months, along with Raaghav Mahajan(my Harley buddy), we have been watching a disproportionate number of incidents involving Street 750s- and in particular their rims and front ends- forks, headlights and triple trees.
We have had quite a few bent/broken rims and this post is meant from that perspective for all riders, not just the 750s- as disproportionate the numbers may be, the incidents are not restricted to them alone.
I will list a set of issues first and address the possible corrective measures in a bit-
1. A lot of new riders have graduated from smaller bikes, engine capacity as well as performance envelope- wise and the one thing that riders need to keep an absolute control on is the acceleration that their bikes have, as compared to what they were riding earlier. Coming off corners, dropping gears on completing overtaking and turning on the power- etc. This is being coupled with not adjusting your stance and eyesight focus for the new motorcycle is a set up for disasters.
2. Deceleration on seeing an obstacle, be it a goat, truck, pothole, speed breaker- due to the acceleration being of a few degrees higher- more often than not, the riders are 'entering' these conditions faster than they are used to, faster than their bikes can handle and resultant- they either collide with the obstacle, or 'hit' it with force- that it results in deformation of rims and/or other vehicle body parts. Stance and focus again are to be worked on.
3. Traditionally tires for Indian motorcycles are of larger profile, due to their experience on Indian roads. As it seems to many, the rubber of the bikes we ride seems to be of softer compound, not to mention of a lower aspect ratio- much needed to ensure safe acceleration and braking, as opposed to having harder compound tires which would result in a disastrous skid in either condition.
Many riders got good exposure with the group rides to Igatpuri just befor the monsoons, and especially on the way down the 8-10Km downhill from Manas to Latifwadi. Gear control, less use of brakes and the proper head position while entering curves, and while riding fast on straights.
I will try and elaborate on a few procedures that we feel would make an impact on your quality of riding Let me begin with the smallest but oft ignored technicality first.
1. Check your tire pressure every week or two weeks at the least. This ensures proper aspect ratio of the tire and therefore the best possible protection on impact, optimum tread while riding- meaning safer acceleration and maximum contact while braking.
Most basic air compressors do not remove water vapour and that results in minor heating issues on tires- Nitrogen based air compressors/tanks are usually better maintained, and scrub water vapour better therefore resulting in lesser heating of tires. The difference is marginal and I will be free to argue about this offline. Make sure you have the correct tire pressure saved for your bike on your phone.
2. While riding- please start making it a habit to use your front brakes more while braking. Most riders we see, use the rear brakes and you simply have to start front-biased braking. Begin to use this at lower speeds, and work your control upwards. For bikes without ABS- learn to pulse the brakes, to prevent seizing the front wheel under heavy braking. Learn to work the front suspension and dramatically lessen your braking distance. While shifting bias forward- ensure that you use the rear to maintain rear wheel directional control and prevent the bike from coming out under your seat.
3. The single biggest issue for new bike riders has been the issue of braking- this being handled in the above point- should be practiced every time you leave your building, and on every ride you do, as only practice will change the way we have been using bikes, with mostly non-existent front brakes till now...
4. Eyesight- stop looking down in front of your wheel- its too late to do anything about it, except brace for impact if its in front of you. Chin. Chin. Chin.
Its not a song or chant- lift your chin, force yourself to look up- start looking 50-100 meters ahead of you... The faster your go, practice looking at the horizon. further away from the bike. For many that use their bikes in the city, this is a notoriously difficult exercise- but you have no option, like the front braking issue- similarly this chin-up riding.
The best road to practice this is the Igatpuri-Latifwadi stretch, where all the time, you will be on the throttle, with the power on the rear wheel all the time, and with your eyes looking as far ahead as possible, into the next turn to check for your line and for any aberrations in the road surface.
This note is by no means comprehensive nor is it a accident-proof-your-bike essay. Practice your new bikes, air pressure, front brakes, chin-up.... make a better rider out of yourself. We are looking at a wonderful riding season from now till April-end atleast.
Help make the group riding experience a better one.
We have had quite a few bent/broken rims and this post is meant from that perspective for all riders, not just the 750s- as disproportionate the numbers may be, the incidents are not restricted to them alone.
I will list a set of issues first and address the possible corrective measures in a bit-
1. A lot of new riders have graduated from smaller bikes, engine capacity as well as performance envelope- wise and the one thing that riders need to keep an absolute control on is the acceleration that their bikes have, as compared to what they were riding earlier. Coming off corners, dropping gears on completing overtaking and turning on the power- etc. This is being coupled with not adjusting your stance and eyesight focus for the new motorcycle is a set up for disasters.
2. Deceleration on seeing an obstacle, be it a goat, truck, pothole, speed breaker- due to the acceleration being of a few degrees higher- more often than not, the riders are 'entering' these conditions faster than they are used to, faster than their bikes can handle and resultant- they either collide with the obstacle, or 'hit' it with force- that it results in deformation of rims and/or other vehicle body parts. Stance and focus again are to be worked on.
3. Traditionally tires for Indian motorcycles are of larger profile, due to their experience on Indian roads. As it seems to many, the rubber of the bikes we ride seems to be of softer compound, not to mention of a lower aspect ratio- much needed to ensure safe acceleration and braking, as opposed to having harder compound tires which would result in a disastrous skid in either condition.
Many riders got good exposure with the group rides to Igatpuri just befor the monsoons, and especially on the way down the 8-10Km downhill from Manas to Latifwadi. Gear control, less use of brakes and the proper head position while entering curves, and while riding fast on straights.
I will try and elaborate on a few procedures that we feel would make an impact on your quality of riding Let me begin with the smallest but oft ignored technicality first.
1. Check your tire pressure every week or two weeks at the least. This ensures proper aspect ratio of the tire and therefore the best possible protection on impact, optimum tread while riding- meaning safer acceleration and maximum contact while braking.
Most basic air compressors do not remove water vapour and that results in minor heating issues on tires- Nitrogen based air compressors/tanks are usually better maintained, and scrub water vapour better therefore resulting in lesser heating of tires. The difference is marginal and I will be free to argue about this offline. Make sure you have the correct tire pressure saved for your bike on your phone.
2. While riding- please start making it a habit to use your front brakes more while braking. Most riders we see, use the rear brakes and you simply have to start front-biased braking. Begin to use this at lower speeds, and work your control upwards. For bikes without ABS- learn to pulse the brakes, to prevent seizing the front wheel under heavy braking. Learn to work the front suspension and dramatically lessen your braking distance. While shifting bias forward- ensure that you use the rear to maintain rear wheel directional control and prevent the bike from coming out under your seat.
3. The single biggest issue for new bike riders has been the issue of braking- this being handled in the above point- should be practiced every time you leave your building, and on every ride you do, as only practice will change the way we have been using bikes, with mostly non-existent front brakes till now...
4. Eyesight- stop looking down in front of your wheel- its too late to do anything about it, except brace for impact if its in front of you. Chin. Chin. Chin.
Its not a song or chant- lift your chin, force yourself to look up- start looking 50-100 meters ahead of you... The faster your go, practice looking at the horizon. further away from the bike. For many that use their bikes in the city, this is a notoriously difficult exercise- but you have no option, like the front braking issue- similarly this chin-up riding.
The best road to practice this is the Igatpuri-Latifwadi stretch, where all the time, you will be on the throttle, with the power on the rear wheel all the time, and with your eyes looking as far ahead as possible, into the next turn to check for your line and for any aberrations in the road surface.
This note is by no means comprehensive nor is it a accident-proof-your-bike essay. Practice your new bikes, air pressure, front brakes, chin-up.... make a better rider out of yourself. We are looking at a wonderful riding season from now till April-end atleast.
Help make the group riding experience a better one.
☺😊
ReplyDelete