Using the Clutch
A few new riders on the Harley circuit were concerned about the clutch- on a high torque engined bike- here goes my reply.
'A-
this is one very expensive way to learn- by reading on others notes on FB.
Having warned you_
The first gear in the Harley is a kind of spring loaded shift, where the 'thunk' is engineered into the system for effect. You do not try and do anything like adjusting the clutch etc to try and eliminate this. You will only land up killing your clutch.
All other gear changes should be as smooth as 'clicks' and you should feel the gears 'notching' and move on.
Clutchless changes stress the synchromesh rings and you will eat into them- so use the clutch as provided.
On slopes, upward and down- keep the bike in gear- and under NO circumstances are you to 'free roll' or 'neutral' the bike- stay in gear and fingers OFF the clutch. If you try and bring it down on brakes, you will over heat the brakes, cause fade and crash. Simple. Unfortunately every year, we learn this about 20-24km after Amboli (west bound) when we lose a few bikes to overheated and faded brakes because of faulty riding style.
You are to use the clutch only to shift gears and you will not 'half clutch' the bike. You will eat your clutch in under 100-2500km, if you try this.
Almost- re learn to ride a high torque bike, and learn slow speed riding, as anyone can ride fast.. Learn to control the EFI system and your throttle control at speed <10kmph- that is the beauty of riding- without jerking it or half-clutching it...
I should think there will be a ride to Igatpuri on saturday morning. Do try and come along with your safety gear.'
-KD
'A-
this is one very expensive way to learn- by reading on others notes on FB.
Having warned you_
The first gear in the Harley is a kind of spring loaded shift, where the 'thunk' is engineered into the system for effect. You do not try and do anything like adjusting the clutch etc to try and eliminate this. You will only land up killing your clutch.
All other gear changes should be as smooth as 'clicks' and you should feel the gears 'notching' and move on.
Clutchless changes stress the synchromesh rings and you will eat into them- so use the clutch as provided.
On slopes, upward and down- keep the bike in gear- and under NO circumstances are you to 'free roll' or 'neutral' the bike- stay in gear and fingers OFF the clutch. If you try and bring it down on brakes, you will over heat the brakes, cause fade and crash. Simple. Unfortunately every year, we learn this about 20-24km after Amboli (west bound) when we lose a few bikes to overheated and faded brakes because of faulty riding style.
You are to use the clutch only to shift gears and you will not 'half clutch' the bike. You will eat your clutch in under 100-2500km, if you try this.
Almost- re learn to ride a high torque bike, and learn slow speed riding, as anyone can ride fast.. Learn to control the EFI system and your throttle control at speed <10kmph- that is the beauty of riding- without jerking it or half-clutching it...
I should think there will be a ride to Igatpuri on saturday morning. Do try and come along with your safety gear.'
-KD
#BombayHarriers
No comments:
Post a Comment